Plumbing, Heating & Ventilation
3VP-TS, 3", Pellet Vent Tee, With Tee Cap, Model VP Type L Pellet Vent, The Tee Cap Can Be Removed For Inspection & Cleanout, Used To Transition From Horizontal To Vertical Orientation, Provides Easy Access For Inspection & Maintenance.
3", 3VP-CS, Ceiling Support & Firestop, Model VP Type L Pellet Vent, Must Be Installed When Passing Through A Floor Or Ceiling In A Properly Framed Opening, Required By Most Local Codes.
3/4", 3/4VP-WS Pellet Tee Support, Model VP Type L Pellet Vent, Can Be Used To Support Either A 3" Or 4" Model VP Tee Installation.
3VP-WT, 3", Pellet Wall Thimble, Model VP Type L Pellet Vent, Must Be Used For All Thru The Wall Installations Involving Combustible Construction, Maintains Airspace Clearance, Centers Pipe Between Walls, Telescopic Design Can Be Used On Standard Walls 5" To 9" Thick.
3", 3VP-PC, Pipe Connector, Model VP Type L Pellet Vent, Used As A Starter Section To Connect The Flue Collar Of The Appliance To The Model VP Vent System.
3VP-SC, 3", Pellet Storm Collar, Used To Provide A Weather Proof Seal To Pipe Above Roof Flashing, Seal Inner Edge With Hi-Temp Silicone Sealant, Type L Pellet Pipe.
3VP-AF, 3", Adjustable Pellet Flashing, Model VP Type L Pellet Vent, Flashings Provide A Transition At The Roof Through Which The Vent Will Pass, Designed For Roofs Having A Slope Of 0/12 Flat To 6/12, Used To Waterproof Installations That Penetrate The Roof Line.
VP-VC, 3", Vertical Termination Cap, For Pellet Pipe Installations, Vent Termination For Vertical Thru-The-Roof Installations, Type L Pellet Vent, Provides Necessary Protection Of The Vent System From Rain & Other Elements.
3", 3VP-HC Pellet Horizontal Termination Cap, Model VP Type L Pellet Vent, Termination Is Specifically Designed For Use On Installations In Which The Vent Terminates In A Horizontal Orientation.
1/2" White 90 Degree Street Elbow, Male Thread x Slip, Used To Make A Right Angle Turn From Another Fitting, Used In Sprinkler & Irrigation Systems, Meets The Requirements Of ASTM D 2466.
3/4" White 90 Degree Street Elbow, Male Thread x Slip, Used To Make A Right Angle Turn From Another Fitting, Used In Sprinkler & Irrigation Systems, Meets The Requirements Of ASTM D 2466.
1" White 90 Degree Street Elbow, Male Thread x Slip, Used To Make A Right Angle Turn From Another Fitting, Used In Sprinkler & Irrigation Systems, Meets The Requirements Of ASTM D 2466.
3" x 5', 3VP-60, Pellet Stove Pipe, Model VP, Type L Vent, Tested & Listed To UL-641 Standard As Well As The UL-103 Standard.
1-1/4" White 90 Degree Street Elbow, Male Thread x Slip, Used To Make A Right Angle Turn From Another Fitting, Used In Sprinkler & Irrigation Systems, Meets The Requirements Of ASTM D 2466.
1-1/4" x 1/2" Reducer Bushing, Spigot x Slip, Used To Reduce The Size Of A Pipe, Used In Sprinkler & Irrigation Systems, Meets The Requirements Of ASTM D 2466.